Category: Electronics Projects

Electronics Projects, Micro Controller Projects, 8051 Projects.

State Electricity Board Line Cutting Control System using PC

Electric Line Cutting System
State Electricity Board Line Cutting Control System using PC

 

Abstract:

State Electricity Board (SEB) Line Cutting Control System using PC is provides facility to control the State Electricity Board electric line cutting control by software on PC. By using this project, admin can control his/her Industrial, Domestic and Commercial electric line cutting by managing date or time entered in the software installed in PC. In our project when particular date and time meets then our software sends signal to micro controller for further process via MAX232 IC. Now micro – controller 8051 send the proper commands to the ULN 2003 IC which controls the relays. These relays control cutting the line connected to it, thus electric to that particular line (Industrial, Domestic and Commercial) with help of these relay. The admin has option to enter the separate date and time for each of three Industrial, Domestic and Commercial line Read more

Electrical Appliances Automation using Android Phone via Bluetooth

Appliances Automation using Android Phone via Bluetooth
Appliances Automation using Android Phone via Bluetooth

Abstract:

Electrical Appliances Automation using Android Application via Bluetooth project is to control the electric appliances wirelessly by using android mobile’s Bluetooth. There is an android application which has to be installed on user’s mobile. Now using this application user can control all the electric appliances of their home according to their choice. There is a micro controller based circuit attached with the electric board which has the connection of all the appliances to be controlled. A Bluetooth module is connected to this circuit which receives the signal from mobile’s bluetooth and forwarded it to the controller for further process. Controller checks the command receives and matches this commands from its memory. After then it gives output to the ULN2803 which control the relay to be ON or OFF according to command. The relay works as automatic switch for the appliance connected with it. Thus, this system gives user to free from extra remote or manually control the home’s appliances. This system can be applied in industry or in offices. Read more

GSM based Locker Security System with EEPROM

GSM based Locker Security System
GSM based Locker Security System

Abstract:

GSM based Locker Security System with EEPROM to protect the locker against theft or misuse by other person. This project is controlled by micro controller 8051 with GSM modem. There is a 3×4 matrix keypad to enter the password for operate the locker. If any other person or theft will try to enter the password and if he tries three times with wrong password then our system automatically sends the theft alert message to administrator using GSM modem. There is 16×2 character LCD display which displays all the information like password matched or not, sending theft alert message etc. Read more

AC Motor Speed Control using IR TV Remote with ZVS, 8051

AC Motor Speed Control using IR TV Remote with ZVS
AC Motor Speed Control using IR TV Remote with ZVS

Abstract:

The main objective of AC Motor Speed Control using IR TV Remote to provides controlling the speed of AC motor or any electrical appliances by a TV remote with ZVS method. TSOP receives the signal from TV remote and provides it to micro – controller for further process. TSOP 1738 is a high sensitive IR receiver which can sense 38 KHz IR light. This project has coverage distance up to 10 meter, so it can be used at home offices, Showrooms and etc. This project can easily installed and used. Basically, AC motors need more current, so we use Triac driver for our driving AC motor. Here we need to consider two factors, firstly driving AC motor with low current and protecting micro controller from high current which is done by using MOC3021. A 16×2 character LCD is also used here to displaying the speed of motor. Read more

Wireless mobile charging

Wireless charger
Wireless mobile charger


Abstract:

The main objective of Wireless Charger System is to charge the mobile battery by using wireless charger. The dream of wireless charging is just to be able to plop your phone on a shelf after work and have it fully charged when you pick it up again on your way out. This technology will replace cables and standardize on one interface, potentially being able to adjust power settings to charge different types of batteries.

Read more


Provided by orange county fountain repair

News

Hi friends
First of all, we thank you because you may have used our website below.
We are happy to tell you that Techsodes Corporation has created the microcontroller open source code editor named as MikroStudio IDE first time in India. This software is a power full tool for code development of microcontrollers like 8031, 8032, 8051, 8052, Mcs51, AVR, PIC, STM8, Z80, EZ80, Z180, padauk, rabbit and gameBoy etc. It is absolutely free and is also better than other programmable software or IDE (Integrated Development Environment) because they can programmed only few microcontrollers. MikroStudio IDE has been support 3000+ microcontroller without installation other cores or plugin. MikroStudio IDE used sdcc, avr-gcc and gputils compilers. MikroStudio IDE has also provides you an open source hardware and software community where you can discuss your problems with us and that problem will be solved by the community.
Join community
Download MikroStudio IDE V2.2
Holler Box